User Tools

Site Tools


sensors:lsm111

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sensors:lsm111 [2012/09/10 16:11]
karina [Electrical data]
sensors:lsm111 [2021/08/14 04:21] (current)
Line 10: Line 10:
 LMS 1XX LMS 1XX
 {{:sensors:How to store data on LMS1XX.pdf|How to store data using SICK Laser}} {{:sensors:How to store data on LMS1XX.pdf|How to store data using SICK Laser}}
 +
 +LMS 1XX
 +{{:sensors:LMS1xx_LMS5xx_TiM3xx_JEF300_JEF500 Telegrams.pdf|LMS1xx Developer's guide}}
  
 {{:sensors:lms100.gif?200|}} {{:sensors:lms100.gif?200|}}
 +
 +SOPAS
 +{{:sensors:setup.exe|SOPAS setup.exe}}
  
 ====== Specifications ====== ====== Specifications ======
Line 154: Line 160:
 |- Type|Two-channel rotary encoder with 90° phase offset||| |- Type|Two-channel rotary encoder with 90° phase offset|||
 |- Enclosure rating|IP 54| | | |- Enclosure rating|IP 54| | |
-|- Supply voltage|Uv – 3 V| |Uv|+|- Supply voltage|U<sub>V</sub> – 3 V| |U<sub>V</sub>|
 |- Outputs required on the incremental encoders|Push&/Pull||| |- Outputs required on the incremental encoders|Push&/Pull|||
 |- Pulse frequency| | |100 kHz| |- Pulse frequency| | |100 kHz|
Line 162: Line 168:
 |- Number|3||| |- Number|3|||
 |- Voltage drop load| |2 V| | |- Voltage drop load| |2 V| |
-||||| +|- Maximum switching current| | |140 mA
-||||| +|- Current limiting (after 5 ms at 25°C (77 °F)|100 mA| |200 mA
-||||| +|- Power-up delay|Negligible||| 
-||||| +|- Switch off time| |0.8 ms|2 ms
-||||| +|**Relay switching outputs** LMS122/123|||| 
-||||| +|- Number|2||| 
-||||| +|- Switching capacity| | |DC 30 W/ AC 37,5 VA
-||||| +|- Switching voltage| | |DC 110 V/ AC 125 V
-||||| +|- Switching current| | |0.5 A at DC 30 V
-||||| +|- Switching capacity| | |10μA DC 10 mV
 +|- Switching cycles|10<sup>5</sup>| | | 
 +|- Power-up delay| |2 ms|4 ms| 
 +|- Switch off time| |2 ms|4 ms| 
 +|**Serial auxiliary interface**|||| 
 +|- Communication protocol|RSH232 (proprietary)||| 
 +|- Transmission speed|9,600 Baud|57.6 kBd|115.2 kBd| 
 +|**Serial host interface**|||| 
 +|- Communication protocol|RSH232 (proprietary)||| 
 +|- Transmission speed (selectable)|9,600 Baud|57.6 kBd|115.2 kBd| 
 +|- Cable length at 38.400 kBd and wire cross- section 0.25 mm2 (approx. 24 AWG)| | |15 m (49.21 ft)| 
 +|- Galvanic de-coupling|Yes||| 
 +|- Wire cross-section of the connecting cable| | |0.25 mm2 (approx. 24 AWG)| 
 +|Ethernet|10/100 MBit/s||| 
 +|CAN|20 kBit/s, 500 kBit/s, 1 Mbit/s|||
  
 ===== (1*)(2*)(3*) ===== ===== (1*)(2*)(3*) =====
sensors/lsm111.1347286301.txt.gz · Last modified: 2021/08/14 04:20 (external edit)