Differences

This shows you the differences between two versions of the page.

--- projects:ideas:jd [2013/04/09 13:54]
claes created
+++ projects:ideas:jd [2021/08/14 04:21] (current)
@@ Line 1: / Line 1: @@
 ====== John Deere Projects ======
-===== Implement steere by wire =====
+===== Implement steere by wire/Electrical Steering =====
-mount the part suggested in ALV and connect it to the can bus
+To control the tractor via software we need to implement an electrical steering. In the course ALV a group has suggested different solutions for this project, we suggest to follow their recommandations.
+The goal is to control the steering via the CAN-Bus on the tractor.
+===== Control of all tractor functions via CAN-Bus =====
+We need to be able to control all functions of the tractor via the CAN-Bus. If the functions is not implemented, it has to be implemented.
+  * CVT
+  * RPM
+  * Steering
+  * Light
+  * Horn
+  * Front and rear hitch
+  * 2WD/4WD
+  * ...
-===== CAN Interface =====
+The next step is to connect a computer with control software(MobotWare/FroboMind) to the CAN-Bus and program the interface (Based on the Hako plugin).
-Connect a computer running MobotWare to the CAN-Bus and establish connections.
+===== Implement odometry on the tractor =====
+Sensors for the selected kinematic model; either Ackermann or Bicycle (currently the bicycle model are beeing used). We need
+  * Steering angle on both front wheels.
+  * Encoder on all drive-wheels or the shaft.

Technology in Crop Production