Table of Contents
Trimble AgGPS542 - GNSS Receiversystem
The AgGPS 542 has the same specifications as the AgGPS 442.
The AgGPS 542 from the company Trimble. All information is copied from this web.
IP:
169.254.1.1
169.254.1.2
169.254.1.3
Help
Documentation
| Product Manuals |
|---|
| AgGPS 442/542 GPS Receivers User Guide v3.30 (2235 KB) |
| Trimble 900 MHz Radios Customer FAQ (122 KB) |
| Troubleshooting |
| link to homepage |
| Software Downloads |
| Instructions: WinFlash v1.212 – Device Configuration(281 KB) |
| v4.41 Firmware - Not avaliable |
Specifications
| General specifications | |
|---|---|
| Feature | Specification |
| Keyboard and display | VFD display 16 characters by 2 rows On/Off key for one button startup using AutoBase technology Escape and Enter key for menu navigation |
| Receiver type | Modular GPS receiver |
| Antenna type | Zephyr Geodetic Model 2 Also supports legacy Trimble antennas ZephyrTM, Zephyr Geodetic, Micro-CenteredTM, Z+ Choke Ring, Rugged Micro-Centered. |
| Physical specifications | |
|---|---|
| Feature | Specification |
| Dimensions (LxWxH) | 24 cm (9.4 in) x 12 cm (4.7 in) x 5 cm (1.9 in) including connectors |
| Weight | 1.65 kg (3.64 lbs) receiver with internal battery and radio |
| 1.55 kg (3.42 lbs) receiver with internal battery and no radio | |
| Temperature | |
| - Operating | –40 °C to +65 °C (–40 °F to +149 °F) |
| - Storage | –40 °C to +80 °C (–40 °F to +176 °F) |
| Humidity | 100%, condensing |
| Waterproof | IP67 for submersion to depth of 1 m (3.28 ft) |
| Shock and vibration | Tested and meets the following environmental standards: |
| - Shock, non operating | Designed to survive a 2 m (6.6 ft) pole drop onto concrete MIL-STD-810F, Fig. 514.5C-17 |
| - Shock, operating | To 40 g, 10 ms, saw-tooth |
| - Vibration | MIL-STD-810F, Fig 514.5C-17 |
| Measurements | Advanced Trimble Maxwell(TM) Custom GPS chip Proven Trimble low elevation tracking technology |
| Electrical specifications | |
|---|---|
| Feature | Specification |
| Power | |
| - Internal | Integrated internal battery 7.4 V, 7800 mA-hr, Lithium-ion Internal battery operates as a UPS in the event of external power source outage Internal battery will charge from external power source when input voltage is >15 V Integrated charging circuitry |
| - External | Power input on Lemo 7-P0S is optimized for lead acid batteries with a cut-off threshold of 10.5 V Power source supply (Internal / External) is hot-swap capable in the event of power source removal or cut off 9 V to 30 V DC external power input with over-voltage protection Receiver will automatically turn on when connected to external power source of 15 V or greater |
| Power consumption | <8 W in RTK Base mode with internal transmit radio |
| Base station operation times on internal battery | Typically 8–10 hours based on transmitter power, types of messages transmitted, and temperature |
| Rover operation times on internal battery | Typically 12 hours, varies with temperature. |
| Certification | Part 15.247 and Part 90 FCC certifications Class B Device FCC Part 15 and ICES-003 certifications RSS-310, RSS-210 and RSS-119 Industry Canada certifications ACMA AS/NZS 4295 approval CE mark compliance C-tick mark compliance UN ST/SG/AC 10.11/Rev. 3 Amend. 1 (Li-ion Battery) UN ST/SG/AC 10/27/Add. 2 (Li-ion Battery) WEEE |
| Communication specifications | |
|---|---|
| Feature | Specification |
| Communications | |
| - Port 1 (7-pin 0S Lemo) | 3-wire RS-232/CAN |
| - Port 2 (D-sub 26-pin) | Full RS-232 (through multi-port adaptor) 3-wire RS-232 |
| - Bluetooth | USB (On the Go) Ethernet Fully-integrated, fully-sealed 2.4 GHz Bluetooth* |
| Integrated radios (optional) | Fully-integrated, fully-sealed internal 450 MHz, Tx, Rx, or Tx/Rx Fully-integrated, fully-sealed internal 900 MHz, Tx, Rx, or Tx/Rx |
| - Channel spacing (450 MHz) | 12.5 KHz or 25 KHz spacing available |
| - Frequency approvals (900 MHz) | USA (-10), Australia (-30), New Zealand (-20) |
| - 450 MHz transmitter radio power output | 0.5 W / 2.0 W |
| - 900 MHz transmitter radio power output | 1.0 W |
| Data output | Proprietary Trimble Ag CMR+ |
| *Bluetooth type approvals are country specific. For more information, contact your local Trimble office or representative. | |