This is an old revision of the document!
Armadillo Calibration
Odometri constants
It is asumed that the tuningpoint for the belts is the center of the belts.
cl=0.00348377
cr=0.003193242
w =1.68336
UMB-mark test
BEFORE CALIBRATION
r c.g.cw(cm) = 83,43
r c.g.ccw(cm) = 128,6701986
L=2m
| CLOCKWISE |
| | ϵx [cm] | | ϵy [cm] |
| 1 | -63 | | -63,5 |
| 2 | -50,5 | | -59 |
| 3 | -34 | | -65 |
| 4 | -26,5 | | -78,5 |
| 5 | -41 | | -91,5 |
| Xc.g.= | -43 | Yc.g.= | -71,5 |
| COUNTERCLOCKWISE |
| | ϵx [cm] | | ϵy [cm] |
| 1 | -71 | | 97 |
| 2 | -100 | | 112 |
| 3 | -74 | | 87 |
| 4 | -69 | | 123 |
| 5 | -65,5 | | 100,5 |
| Xc.g.= | -75,9 | Yc.g.= | 103,9 |
Calculations
| β = | -235,7484076 cm |
| | -2,357 m |
| b -actual = | 1,68336 | calibrated value of wheelbase |
| 1.524 | before calibration |
| | Correction factor | Before Calibration | After Calibration |
| cl = | 1,0156 | 0,0034301 | 0,00348377 |
| cr = | 0,9844 | 0,003244 | 0,003193242 |
AFTER CALCULATION
r c.g.cw(cm) = 4,12
r c.g.ccw(cm) = 29,35
| CLOCKWISE |
| | ϵx [cm] | | ϵy [cm] |
| 1 | -6 | | -14,5 |
| 2 | -12,5 | | -10 |
| 3 | 5,5 | | 8 |
| 4 | -5,5 | | -7 |
| 5 | 2,5 | | 10,5 |
| Xc.g.= | -3,2 | Yc.g.= | -2,6 |
| COUNTERCLOCKWISE |
| | ϵx [cm] | | ϵy [cm] |
| 1 | -38,5 | | 24 |
| 2 | -27 | | 10 |
| 3 | -19,5 | | 11 |
| 4 | -22,5 | | 20 |
| 5 | -22 | | 4 |
| Xc.g.= | -25,9 | Yc.g.= | 13,8 |