This is an old revision of the document!

Trimble AgGPS542 - GNSS Receiversystem

The AgGPS 542 has the same specifications as the AgGPS 442.
The AgGPS 542 from the company Trimble. All information is copied from this web.

IP:
169.254.1.1
169.254.1.2
169.254.1.3

Documentation

Product Manuals
AgGPS 442/542 GPS Receivers User Guide v3.30 (2235 KB)
Trimble 900 MHz Radios Customer FAQ (122 KB)
Troubleshooting
link to homepage
Software Downloads
Instructions: WinFlash v1.212 – Device Configuration(281 KB)
v4.41 Firmware - Not avaliable

General specifications
Feature	Specification
Keyboard and display	VFD display 16 characters by 2 rows On/Off key for one button startup using AutoBase technology Escape and Enter key for menu navigation
Receiver type	Modular GPS receiver
Antenna type	Zephyr Geodetic Model 2 Also supports legacy Trimble antennas ZephyrTM, Zephyr Geodetic, Micro-CenteredTM, Z+ Choke Ring, Rugged Micro-Centered.

Physical specifications
Feature	Specification
Dimensions (L x W x H)	24 cm (9.4 in) x 12 cm (4.7 in) x 5 cm (1.9 in) including connectors
Weight	1.65 kg (3.64 lbs) receiver with internal battery and radio
	1.55 kg (3.42 lbs) receiver with internal battery and no radio
Temperature
- Operating	–40 °C to +65 °C (–40 °F to +149 °F)
- Storage	–40 °C to +80 °C (–40 °F to +176 °F)
Humidity	100%, condensing
Waterproof	IP67 for submersion to depth of 1 m (3.28 ft)
Shock and vibration	Tested and meets the following environmental standards:
- Shock, non operating	Designed to survive a 2 m (6.6 ft) pole drop onto concrete MIL-STD-810F, Fig. 514.5C-17
- Shock, operating	To 40 g, 10 ms, saw-tooth
- Vibration	MIL-STD-810F, Fig 514.5C-17
Measurements	Advanced Trimble Maxwell(TM) Custom GPS chip Proven Trimble low elevation tracking technology