This is an old revision of the document!
RT-BMS software - Controller 2
The Real Time Battery Management System (RT-BMS) is now managed by the new software Controller 2. This software is provided free of charge to all the BMS users.
In order to use the new software “Controller 2”, following requirements must be observed:
A) RT-BMS Master unit HW ver 2.1 must have the slight hardware modification to support the firmware 3.x,
B) The firmware 3.X version must be installed in the RT-BMS Master unit,
C) The USBCOM cable must be the latest version 4i.
RT-BMS Main Control Unit for up to 192 cells (with RS-232, with CAN)
gwl-power-ev-report-20091115.pdf
gwl-power-ev-report-20091115b.pdf
gwl-bms-faq01.pdf
gwl-bms-faq02.pdf
The Cell Ballancing Unit to work with RT-BMS. It provides the monitoring and balancing of the individual cell.